A fallen tree is a dangerous thing and it can destroy the beauty of the backyard. So, you should cut it, clear the way and collect some hardwood. To do the job safely, you need to learn how to cut a fallen tree with a chainsaw. However, it is best to use a professional chainsaw to cut down a fallen tree as it is as useful as it is to help you do any task quickly.
If you do not know how to cut a fallen tree with a chainsaw then we can help you. For your convenience, we will now try to highlight the step-by-step guideline here, which you can easily cut the fallen tree using a chainsaw by following. So let’s get started.
How to Cut a Fallen Tree with a Chainsaw- Step by Step Guideline
So you like to know how you can cut a fallen tree with a chainsaw. This guideline will help you to do this task easily. So, keep reading these steps and do accordingly.
Preparation and Calculation
Make safety gear head first and in this case please do not take any shortcuts here for your improvement.
A fallen tree can be small or large and the way it falls/leans on the ground can be different. So, you have to prepare the cut based on the conditions. In addition, your logs, branches should be planned and calculated depending on their use. Say, you want to collect some hardwood wood 3 feet long. In this case, you need to make cuts no more than 3 feet.
Again, imagine that you want to collect some logs for making furniture in the future. Here, you need to cut the tree into pieces that match your furniture needs. Well, the size and shape of the tree should match your needs. You cannot use premature wood to make any furniture.
Suitable Cutting Location
As a chainsaw user, you probably know the word “kickback”. A kickback occurs for a variety of reasons. If you are unaware of your cutting, kickbacks can lead to fatal accidents. So, you need to be aware of the kickback and take the appropriate position depending on your cutting angle.
During the cuts, if the bottom of the tax bar touches the log, it will pull you towards the log. On the other hand, if the top of your saw blade connects to the log/branch, it leaves you behind. So, you can’t be unaware of these pulling / pushing effects of chainsaws. You need to be prepared in both cases.
So what to do in this case? Just create a boxer position when reading your cut. If you are a right-handed person, bend your knees and keep your left leg forward while keeping your right leg behind. Always keep an eye on the saw blade and the movement of your boots/feet.
Cut a Fallen Log
Any fruit tree has some raw cut areas that pinch the saw while cutting. This is due to the contraction and tension of the log. The upper part of the log has tension due to compression and the lower part due to the inclined angle. So, when you cut these areas your saw gets stuck. Avoid areas and use a hammer and drift to pinch your saw.
To cut trees, make two separate angles for a single cutting. First, cut the top half and then add to cut the bottom half in the same place. This will give you some relief from cutting your saw. However, if the log diameter is small or convenient for your tax bar, you can cut it directly. That is, starting from the top and ending at the bottom.
Cut Down the Branches of Fallen Trees
If you can cut down all the branches of the tree, it will be easier to make the tree taller. First look for small branches, which are less than 3 inches in diameter. Then, cut the big ones one by one. Just make a permanent length to cut the fallen branches and mark them. Then, cut the branches while maintaining an angle that won’t hurt you or make you tired.
Cut the fallen branches, two separate shots cut through both sides. Try to overlap the cut on the other side each time. So, it will make your cutting effort easier. Now, collect all the branches and keep them away from your cut area. Pile them up to maintain order so that no mishap occurs during their good transportation.
Cut a Bent Tree with Seedlings/Branches
Sometimes there may be seedlings or branches under a fallen tree. The curved branches will store a significant amount of energy between them. The standing part of the tree is pulling the curved part/branch of the tree. As a result, there is tension as energy within the bending branch. Cutting these logs/branches will definitely create a lot of conflict energy.
To cut curved seedlings/branches, tie the top / narrow part of the branch with soil or other safe points. This will save you from the unwanted shaking of tree branches. Then, cut the joining point of the straight and curved parts. Now, you need to make parallel cuts on the downside of the branch. Next, make a vertical cut to join those parallel cuts. Be extra careful for these types of cuts.
What are the Precautions to be taken while cutting Fallen Tree
Always remember, “Security is paramount”. Don’t try to gamble with safety when you are operating gas chainsaws or electric chainsaws. You should take extra care of your hands, feet, body, head, and eyes.
It is recommended that you do not cut down trees alone. If it is impossible to find another sewer, keep at least one attendant with you. The presence of the cut place should be in sight.
Before you start your cutting, make sure you have all the necessary gear. Wear them to avoid any unwanted accidents. Below is a list of required gears:
- Full-sleeve Shirt
- Protective Glass
- Forestry Helmet
- Logging Boots
- Chainsaw Chaps
- Cank Hook
- Safety Goggles
Final Thought
Cutting a fallen tree by using a chainsaw is not a difficult task at all. But, you need to use a professional chainsaw to get the best result while cutting. We try to discuss in this article, how to cut a fallen tree with a chainsaw. Hopefully, our small effort will be helpful for all of you.
Source: Click here
